Spare parts for MAD WAGON

Spare parts for MAD WAGON

Spare parts for MAD WAGON

Option Parts for INFERNO GT2 Type-R.

Spare Parts for SCORPION 2014

High RPM and torque .21 size big block engine. Easy to tune with recoil starter.

*This product does not come with a break-in ring.When you break in, please use the accessories that came with the Readyset when you purchased it.

Gyro unit for MINI-Z readyset. Compatible with blue board RC units, or green board RC units with a blue marking on the gyro connector.

Correspondence table

Complete body set for the Inferno GT2. Licensed 2020 Mercedes AMG GT3 body. Wheelbase : 360mm / Body Dimensions : 661 x 310 x 164mm(With rear wing)

Aluminum big bore shocks for Rage 2.0. Threaded large capacity shock bodies.

■Length 460mm
■Width 323mm
■Height 197mm
■Wheelbase 274mm
■Tread (F/R) 250mm
■Tires (F/R) φ110×70mm
■Gear Ratio 11.803:1
■Weight  2180g (approx.)
■R/C system   Syncro KT-231P+
■Motor TORX 10E

<Kit Contents>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Spanner
●Setting change parts

<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis
●Charger for battery for chassis
●Tools

■Length 490mm
■Width 307mm
■Height 180mm
■Wheelbase 325mm (Can be changd by replacing rear hub collars）
■Tread(F/R) 254mm
■Tires(F/R) (sold separately)
■Gear Ratio 10.14 : 1
■Weight  3,650g   (approx.)

<Kit Content>
●Unassembled kit set
●Clear body
●Window mask sheet
●Pinion gear
●Decals
●1.5, 2.0, 2.5,3.0mm Hexagonal wrench
●Cross wrench 
●Ring gear grease

<Required to run>
■2ch～3ch transmitter & receiver for R/C cars 
■Servo 
■ESC 
■Motor 
■Tire & Inner sponge (for 1/8 Buggy) 
■Wheel 
■Silicone oil for Diff 
■Silicone oil for Shock 
■Paint for coloring body (*spray paint for polycarbonate) 
■Battries for chassis(2S Lipo x2 Recommendation） 
■Charger 
■Tool

■Length 380mm
■Width 249mm
■Height 140mm
■Wheelbase 270mm
■Tread F:221mmR:201mm
■Tire F:φ84×28mm R:φ86.5×42mm
■Gear Ratio 8.23：1
■Weight 1,450g (approx.)
■Motor (sold separately)

＜ Kit Contents ＞
●Unassembled kit set
●Polycarbonate clear body
●Wing
●Window mask seal
●Decals
●Chassis parts
●Cross wrench
●Hex wrench（1.5mm/2.0mm）
●Grease
●Tires, Tire Inners, Wheels
●Pinion Gear

【REQUIREMENT TO RUN】
■2ch～3ch transmitter & receiver for R/C cars 
■Servo 
■ESC 
■Motor 
■Silicone oil for Shock 
■Batteries for chassis(2S Lipo Recommendation） 
■Charger 
■Paint for coloring body (*spray paint for polycarbonate)
■Tool

＜CHASSIS SET CONTENTS＞
●Factory-assembled chassis equipped with EVO main unit installed
●Pinion Gears (15T, 17T, 19T, 21T)
●DWS conversion parts *Front tread conversion parts
●Pinion gear removal tool
●Spare wheel nuts
●Wheel wrench
●Center shaft for L wheelbase
●Wide rear suspension arms for DWS
●swing shafts (4 x long)
●Spur gears (27T, 29T, 31T)

Required to run

●8 x AAA batteries
●Auto Scale Collection (body, wheels and tires)
●Transmitter
●MINI-Z EVO receiver unit compatible with the transmitter used

■Length: 998mm
■Width: 226mm
■Height: 1,850mm
■Weight: 3,100g
■R/C System: Syncro KT-431S, 2.4GHz, FHSS
■Sail Area: 39dm2
■Servo: Sail KS9071-20SW（waterproof）/　Rudder KS4031-06W

＜Readyset Contents＞
●Pre-colored fully assembled hull
●Syncro KT-431S 2.4GHz R/C system installed
●Folding wood boat stand
●Mast Assy
●Decal for Sail
●Painted Rudder, Keel & Ballast

＜Required for operation ＞
●8 x AA sized batteies for transmitter/receiver (4 for transmitter, 4 for receiver)

■Length 160.0mm

■Width 71.0mm
■Height 53.0mm
■Wheelbase 94.0mm（L）
■Tread F : 58.5mm R : 58.5mm
■Tire F : Φ25.0mm×8.5mm R : Φ25.0mm×8.5mm
■Gear ratio 7.23、6.38、5.71、5.97、5.34、4.97、4.5：1
■Front Wheel Offset Narrow +1.0mm
■Rear Wheel Offset Narrow +1.0mm
■R/C System Syncro KT-531P
■Weight 170g

<Readyset Contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 161.0mm
■Width 70.0mm
■Height 51.5mm
■Wheelbase 90.0mm（M）
■Tread F : 58.5mm R : 58.5mm
■Tire F : Φ25.0mm×8.5mm R : Φ25.0mm×8.5mm
■Gear ratio 7.23、6.38、5.71、5.97、5.34、4.97、4.5：1
■Front Wheel Offset Narrow +1.0mm
■Rear Wheel Offset Narrow +1.0mm
■R/C System Syncro KT-531P
■Weight 170g

<Readyset Contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 161.0mm
■Width 70.0mm
■Height 51.5mm
■Wheelbase 90.0mm（M）
■Tread F : 58.5mm R : 58.5mm
■Tire F : Φ25.0mm×8.5mm R : Φ25.0mm×8.5mm
■Gear ratio 7.23、6.38、5.71、5.97、5.34、4.97、4.5：1
■Front Wheel Offset Narrow +1.0mm
■Rear Wheel Offset Narrow +1.0mm
■R/C System Syncro KT-531P
■Weight 170g

<Readyset Contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 156.0mm
■Width 70.0mm
■Height 49.0mm
■Wheelbase 90.0mm （M）
■Tread F:59.5mm R:57.0mm
■Chassis RWD(MR-03)
■Motor Mount RM
■Front Wheel Offset Narrow +1.5mm(for RWD)
■Rear Wheel Offset Wide -1.0mm(for RWD)
■R/C System Syncro KT-531P
■Weight 162g (approx.)

<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels

<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 156.0mm
■Width 70.0mm
■Height 49.0mm
■Wheelbase 90.0mm （M）
■Tread F:59.5mm R:57.0mm
■Chassis RWD(MR-03)
■Motor Mount RM
■Front Wheel Offset Narrow +1.5mm(for RWD)
■Rear Wheel Offset Wide-1.0mm(for RWD)
■R/C System Syncro KT-531P
■Weight 162g (approx.)

<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels

<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 462mm
■Width 200mm(Body width * Excluding mirrors)
■Height 136mm
■Chassis Height 8mm(approx.)
■Wheelbase 260mm
■Tread (F/R)  167mm
■Tires (F/R)  φ64×27.7mm
■Gear Ratio 6.54：1
■Weight  1650g (approx.)
■R/C system &; Syncro KT-231P+
■Motor G14L

<Kit Contents>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts

<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools

■Length 150.0mm
■Width 70.0mm
■Height 50.5mm
■Wheelbase 94.0mm（L）
■Tread F : 59.5mm R : 59.5mm
■Chassis MA-020-N
■Front Wheel Offset Narrow +1.5mm
■Rear Wheel Offset Narrow +1.5mm
■R/C System Syncro KT-531P
■Weight 170g

<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 170.5mm
■Width 70.0mm
■Height 55.0mm
■Wheelbase 98.0mm（LL）
■Tread  F : 59.5mm R : 59.5mm
■Chassis MA-020-N
■Front Wheel Offset Narrow +1.5mm
■Rear Wheel Offset Narrow +1.5mm
■R/C System Syncro KT-531P
■Weight 193g

<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 181.2mm
■Width 78.0mm
■Height 47.75mm
■Wheelbase 98.0mm （LL）
■Tread F:66.5mm R:65.0mm
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +2.5mm(for RWD)
■Rear Wheel Offset Wide +3.0mm(for RWD)
■R/C System Syncro KT-531P

<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels

<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 167.0mm
■Width 70.0mm
■Height 52.0mm
■Wheelbase 98.0mm（LL）
■Tread F : 59.5mm R : 59.5mm
■Tire F : Φ25.0mm×8.5mm R : Φ25.0mm×8.5mm
■Gear ratio 7.23、6.38、5.71、5.97、5.34、4.97、4.5：1
■Front Wheel Offset Narrow +1.5mm
■Rear Wheel Offset Narrow +1.5mm
■R/C System Syncro KT-531P
■Weight 193g

<Readyset Contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 167.0mm
■Width 70.0mm
■Height 52.0mm
■Wheelbase 98.0mm（LL）
■Tread F : 59.5mm R : 59.5mm
■Tire F : Φ25.0mm×8.5mm R : Φ25.0mm×8.5mm
■Gear ratio 7.23、6.38、5.71、5.97、5.34、4.97、4.5：1
■Front Wheel Offset Narrow +1.5mm
■Rear Wheel Offset Narrow +1.5mm
■R/C System Syncro KT-531P
■Weight 193g

<Readyset Contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 164.0mm
■Width 72.0mm
■Height 48.0mm
■Wheelbase 94.0mm（L）
■Tread F : 58.5mm R : 59.0mm
■Chassis MA-020-N
■Front Wheel Offset Narrow +1.0mm
■Rear Wheel Offset Wide +-0.0mm
■R/C System Syncro KT-531P

<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Syncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 166.5mm
■Width 75.0mm
■Height 44.0mm
■Wheelbase 98.0mm （LL）
■Tread F:65.5mm R:65.0mm
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow+1.5mm(for RWD)
■Rear Wheel Offset Wide +1.5mm(for RWD)
■R/C System Syncro KT-531P

<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels

<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 166.5mm
■Width 75.0mm
■Height 44.0mm
■Wheelbase 98.0mm （LL）
■Tread F:65.5mm R:65.0mm
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow+1.5mm(for RWD)
■Rear Wheel Offset Wide +1.5mm(for RWD)
■R/C System Syncro KT-531P

<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels

<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length  123.5mm
■Width   70～76mm
■Height  35mm
■Wheelbase   94.0mm（LL）
■Tread F：61.5～63.0mm／R：61.5～63.0mm
■Motor Mount MM
■Tires F: φ25×8.5mm (sold separately)/R: φ25×8.5〜11mm (sold separately)
■Gear Ratio  7.3、6.3、5.5、4.9：1
■Weight 135g (approx.)
■Motor  KYOSHO SPEED HOUSE / XSPEED 85 (8500KV)

<Kit Contents>
●MR-03EVO-W-MM Factory assembled chassis with KYOSHO SPEED HOUSE XSPEED 85 8500KV brushless motor
●Parts set for changing front tread
●6T・7T・8T・9T Pinion gears
●Wheel wrench
●Tools for pinion gears
●Spare wheel nuts

<Required for Operation>
●Receiver unit
●Transmitter compatible with receiver unit
●Auto Scale Collection (body set, wheels, tires)
●AAA x 4 alkaline batteries or Ni-MH batteries for chassis
●Batteries for transmitter

■Length 120.5mm
■Width 70～76mm
■Height 35mm
■Wheelbase 94.0mm（L）
■Tread F：61.5～63.0mm／R：61.5～63.0mm
■Motor Mount MM2
■Tires F: φ25×8.5mm (sold separately)/R: φ25×8.5〜11mm (sold separately)
■Gear Ratio 7.3、6.3、5.5、4.9：1
■Weight 135g (approx.)
■Motor KYOSHO SPEED HOUSE / XSPEED 56 (5600KV)

KIT CONTENT

■Length 120.5mm
■Width 70～76mm
■Height 35mm
■Motor Mount MM2
■Wheelbase 94.0mm (L)
■Tread F：61.5～63.0mm／R：61.5～63.0mm
■Tires F: φ25×8.5mm (sold separately)/R: φ25×8.5〜11mm (sold separately)
■Gear Ratio 7.3、6.3、5.5、4.9：1
■Weight 135g (Body / tires / wheels not included, battery included.)
■Motor KYOSHO SPEED HOUSE 4100KV

KIT CONTENT

■Length 472mm
■Width 350mm
■Height 198mm
■Wheelbase 295mm
■Tread F/R 278mm
■Tires（F & R） φ128 x 70mm
■Gear Ratio 15.22：1
■Weight 3,610g (approx.)
■Motor TORX10L Brushless Motor kv2850

<Readyset Contents>
●Factory assembled chassis complete with control linkages
●Pre-cut and painted body complete with decals applied
●2.4GHz Syncro KT-231P+ transmitter
●1.5mm/2.0mm/2.5mm L shaped hex wrench
●Cross wrench
●4/5/5.5/7/10mm Integrated spanner

<Required for Operation>
●AA-size batteries x 4 for transmitter
●Battery for driving (2-3S LiPo battery *Installable battery size 143x47x30mm)
●Charger for LiPo battery

■Length (Including body) 456mm
■Width205mm (Excluding mirrors)
■Chassis Height 8mm (approx.)
■Height (Including body) 138mm
■Wheelbase 260mm
■Tread（F／R） 174mm
■Tires（F／R） φ66×25mm
■Gear Ratio 6.54：1
■Weight 約1650g
■R/C system &; Syncro KT-231P+
■Motor G14L

<Kit Contents>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts

<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools

■Length 498mm
■Width (Body width * excluding mirror) 210mm
■Height 136mm
■Wheelbase 274mm
■Tread (F/R) 167mm
■Tires (F/R) φ64×27.7mm
■Gear Ratio 6.54：1
■Weight  1650g (approx.)
■R/C system  Syncro KT-231P+
■Motor  G14L

<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools

<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools

■Length 340mm
■Width 172mm
■Height 83mm
■Chassis type Chain drive4WD
■Wheelbase 199-200mm（Adjustable）
■Tread F:135mm/R:133mm
■TireF:φ48×23mm/R:φ53×35mm
■Gear ratio 3.38：1
■Weight approx.890g(with GAB4201）
■Motor 540class（both sold separately）
■Used propo 2ch 1servo 1ESC
■※Maximum Speed 約55km/h (with Le Mans480T BL）
■※Driving Time approx.23minutes(with Le Mans480T BL）

※Depends on driving conditions

<Kit Contents>
●Chassis kit
●Adhesive shaped tire
●Unpainted body
●Decal
●Wheel wrench（12/4.0）
●5.5/4.5wrench
●FRP shock wrench

<Required for Operation>
●Radio transmitter with 2 channel, 1-servo(Receiving size:L37xW30xH16.5mm)
●1 Electronic speed controller (ESC size：38x31x23mm)
●540 Motor
●Battery for chassis(Battery size：138x48x24.5mm)
●Batteries for transmitter
●Charger for Battery
●Paint for body

■Length 167.5mm
■Width 75.0mm
■Height 46.0mm
■Wheelbase 98.0mm (LL)
■Tread F:64.5mm R:62.0mm
■Chassis RWD (MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +1.5mm (for RWD)
■Rear Wheel Offset Wide +1.5mm (for RWD)
■R/C System Syncro KT-531P

<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels

<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 161.0mm
■Width 72.0mm
■Height 52.0mm
■Wheelbase 94.0mm（L）
■Tread F : 61.5mm R : 59.0mm
■Chassis MA-020-N
■Front Wheel Offset Narrow +2.5mm
■Rear Wheel Offset Wide +-0.0mm
■R/C System Syncro KT-531P

<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 177mm
■Width 78mm
■Height 47.5mm
■Wheelbase 98mm （LL）
■Chassis RWD (MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +3.0mm (for RWD)
■Rear Wheel Offset Wide +3.0mm (for RWD)
■R/C System Syncro KT-531P

<Readyset Contents>
●Factory assembled chassis 
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels

<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

Option parts for Hang-on Racer

Option parts for Hang-on Racer

Mini steering servo for the Hang On Racer. Bolt on ready. 150mm wire with JR type no flange connector housing. Screw and aluminum collar included.

Option parts for Hang-on Racer

■Length  563mm
■Width  414mm
■Wheelbase 384-389mm
■Tread（F/R） 353mm(approx)
■Tires（F/R） For stadium track(Sold separately)
■Gear Ratio 14.12:1
■Weight  4,200g (approx)
■Transmitter 2ch or more 1 servo /1 ESC(Sold separately)

＜Kit Contents＞
●Unassembled chassis kit
●Clear body
●Decals
● Hexagonal wrench (1.5mm、2.0mm、2.5mm、3.0mm)
●Cross wrench
●17mm wheel wrench

＜Required for Operation＞
●2ch～3ch transmitter & receiver for R/C cars
●Servo (high torque servo recommended)
●Motor(for 1/8)
●ESC
●Battries for chassis(7.4vLipox2 Recommendation）
●Charger
●Stadium truck tire
●Wheel
●Inner sponge
●Color for body painting

Rocky terrain for the MINI-Z 4x4. A set of 5 pieces of 480 x 480 x 103mm terrain. Making a square with four pieces and putting the 5th one on the center of the square will make a 960 x 960 x 156mm terrain, and you can enjoy wide variety of terrain by rotating each piece. Even larger terrain can be made using multiple sets.

■Length 167.0mm
■Width 70.0mm
■Height 52.0mm
■Wheelbase 98.0mm（LL）
■Tread F : 59.5mm R : 59.5mm
■Tire F : Φ25.0mm×8.5mm R : Φ25.0mm×8.5mm
■Gear ratio 7.23、6.38、5.71、5.97、5.34、4.97、4.5：1
■Front Wheel Offset Narrow +1.5mm
■Rear Wheel Offset Narrow +1.5mm
■R/C System Syncro KT-531P
■Weight 193g

<Readyset Contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 167.0mm
■Width 70.0mm
■Height 52.0mm
■Wheelbase 98.0mm（LL）
■Tread F : 59.5mm R : 59.5mm
■Tire F : Φ25.0mm×8.5mm R : Φ25.0mm×8.5mm
■Gear ratio 7.23、6.38、5.71、5.97、5.34、4.97、4.5：1
■Front Wheel Offset Narrow +1.5mm
■Rear Wheel Offset Narrow +1.5mm
■R/C System Syncro KT-531P
■Weight 193g

<Readyset Contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 500mm
■Width 210mm(Body width * excluding mirror)
■Height 136mm
■Chassis Height 8mm(approx.)
■Wheelbase 274mm
■Tread (F/R) 167mm
■Tires (F/R) φ64×27.7mm
■Gear Ratio 6.54：1
■Weight  1650g (approx.)
■R/C system &; Syncro KT-231P+
■Motor G14L

<Kit Contents>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts

<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools

■Length 461mm
■Width (Body width * excluding mirror) 210mm
■Height 138mm
■Chassis Height 15mm(approx.)
■Wheelbase 260mm
■Tread (F/R) 167mm
■Tires (F/R) Fφ64×27.7mm
■Gear Ratio 6.54：1
■Weight 1610g (approx.)
■R/C system Syncro KT-231P+
■Motor TORX10E

<Kit Content>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts

<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools

■Length 168.0mm
■Width 79.0mm
■Height 46.5mm
■Wheelbase 98.0mm （LL）
■Tread F:65.5mm R:65.0mm
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +2.0mm(for RWD)
■Rear Wheel Offset Wide +3.0mm(for RWD)
■R/C System Syncro KT-531P

<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels

<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 177.0mm
■Width 76.5mm
■Height 45.0mm
■Wheelbase 98.0mm （LL）
■Tread F:64.5mm R:64.0mm
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +1.5mm(for RWD)
■Rear Wheel Offset Wide +2.5mm(for RWD)
■R/C System Syncro KT-531P

<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels

<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 177.0mm
■Width 76.5mm
■Height 45.0mm
■Wheelbase 98.0mm （LL）
■Tread F:64.5mm R:64.0mm
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +1.5mm(for RWD)
■Rear Wheel Offset Wide +2.5mm(for RWD)
■R/C System Syncro KT-531P

<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels

<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 452mm
■Width 192mm(* Excluding mirrors)
■Height 135mm
■Chassis Height 8mm(approx.)
■Wheelbase 274mm
■Tread (F/R) 174mm
■Tires (F/R) φ66×25mm
■Gear Ratio 6.54：1
■Weight  1650g (approx.)
■R/C system &; Syncro KT-231P+
■Motor G14L

<Kit Contents>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts

<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools

■Length 171.0mm
■Width 75.0mm
■Height 50.0mm
■Chassis MA-020-W
■Wheelbase 98.0mm（LL）
■Tread F : 64.5mm R : 62.0mm
■Tire F : Φ25.0mm×8.5mm R : Φ25.0mm×11.0mm
■Gear ratio 7.23、6.38、5.71、5.97、5.34、4.97、4.5：1
■Front Wheel Offset Narrow +1.5mm
■Rear Wheel Offset Wide +1.5mm
■R/C System Syncro KT-531P
■Weight 193g

<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 171.0mm
■Width 75.0mm
■Height 50.0mm
■Chassis MA-020-W
■Wheelbase 98.0mm（LL）
■Tread F : 64.5mm R : 62.0mm
■Tire F : Φ25.0mm×8.5mm R : Φ25.0mm×11.0mm
■Gear ratio 7.23、6.38、5.71、5.97、5.34、4.97、4.5：1
■Front Wheel Offset Narrow +1.5mm
■Rear Wheel Offset Wide +1.5mm
■R/C System Syncro KT-531P
■Weight 193g

<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 181.2mm
■Width 78.0mm
■Height 47.75mm
■Wheelbase 98.0mm （LL）
■Tread F:66.5mm R:65.0mm
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +2.5mm(for RWD)
■Rear Wheel Offset Wide +3.0mm(for RWD)
■R/C System Syncro KT-531P

<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels

<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 177mm
■Width 76.5mm
■Height 45.0mm
■Wheelbase 98.0mm （LL）
■Tread Wide
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +2.0mm(for RWD)
■Rear Wheel Offset Wide +2.0mm(for RWD)
■R/C System Syncro KT-531P

<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels
●Mini pylons

<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

Spare parts for Optima Mid

Spare parts for OPTIMA MID

USA-1 clear body set with plastic parts. Compatible with 8th scale monster trucks. Includes chrome body parts, decals and masking sheet. Light buckets are compatible with LED optional headlights(97054 / headlights x 8 , Tail lights x 2 and fog lamp x 5). Wheelbase : 360mm / Body dimension : 539 x 206 x 142mm(Without side mirrors & fog lamps)

■Length　490mm
■Width 　307mm
■Height 　180mm
■Ground clearance　28mm
■Wheelbase　325mm 
■Tread（Ｆ／Ｒ）　254mm
■Tires（Ｆ／Ｒ）　sold separately
■Gear Ratio　12.1：1
■Weight　3,360g(approx.)
■Engine　21Class (sold separately)

＜Kit Contents＞
●Unassembled chassis kit
●Special wheels
●Wing
●Special clear body
●Window mask seal
●Fuel tube
●Linkage parts
●Clutch parts
●Air cleaner
●Logo decals
●Commemorative decal
●Ring gear grease
●1.5, 2.0, 2.5mm Hexagonal wrench
●Cross wrench 
●Wheel wrench

＜Required for Operation＞
●2-channel 2-servo R/C system for cars
●Compatible batteries for R/C system
●21 engine
●Muffler
●Tires w/foam inserts for 1/8 buggy
●Starter box
●Plug heater
●Fuel
●Fuel bottle
●Oil for air cleaner
●Shock oil
●Diff oil
●Paint for car body
●Tools

■Length 375mm
■Width 244mm
■Height 142mm
■Wheelbase 255mm
■Tread (F/R) 208mm
■Weight approx1,600g(with 7.2V4000 LiPo)
■Tires (F/R) φ82×36mm
■Motor 540 class size (sold separately)
■Gear ratio 8.28：1

<Kit Contents>
●Kit chassis
●Tire
●Wheel (white)
●Clear body
●Wing (white)
●Mask sheet
●Decals
●hexagon wrench
●Cross wrench
●Shock wrench
●Grease
●Shock oil

<Required for Operation>
●2 channel R/C system
●Servo
●540Motor
●ESC
●210mm Sensor cable
●Battery for chassis（7.4V Ni-MH battery or 7.4V Li-Po battery）
●Charger for battery for chassis
●Batteries for transmitter

■Length 455mm
■Width（Body width） 200mm（210mm）
■Height　120mm
■Wheelbase 260mm
■Tread (F/R)：174mm
■Tires (F/R)：φ63.2×24.2mm
■Gear Ratio 6.54：1
■Weight 1650g(approx.)
■Syncro KT-231P+ transmitter
■Motor G14L

<Kit Contents>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
● Setting change parts

<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools

■ Overall length 177mm

■ Overall width 78mm
■ Overall height 47.5mm
■ Overall weight 130g
■ Wheel base 98mm (LL)
■ Tread F: 67.5mm R: 65.0mm
■ Used chassis RWD (MR-03)
■ Motor mount MM
■ Front wheel offset narrow + 3.0mm (for RWD)
■ Rear wheel offset wide + 3.0mm (for RWD)
■ Used radio Syncro KT-531P

<Ready set contents>
● Factory completed chassis
● Painting / marking Factory completed plastic body
● Syncro KT-531P 2.4GHz transmitter
● Front tread change parts set
● Adjustment front suspension spacer
● 6T / 7T / 8T / 9T pinion gear
● Wheel Wrench
● Pinion removal tool
● Spare wheel nut
● Pairing stick
● Tires and wheels included

<Necessary items for driving>
● 4 AAA alkaline or nickel-metal hydride batteries for driving
● 4 AAA alkaline batteries for transmitter

■Length 167.5mm
■Width 70.0mm
■Height 50.0mm
■Wheelbase 94.0mm（L）
■Tread F : 59.5mm R : 59.5mm
■Tire F : Φ25.0mm×8.5mm R : Φ25.0mm×8.5mm
■Gear ratio 7.23、6.38、5.71、5.97、5.34、4.97、4.5：1
■Front Wheel Offset Narrow+1.5mm
■Front Wheel Offset Narrow+1.5mm
■R/C System Syncro KT-531P
■Weight 193g

<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 167.5mm
■Width 70.0mm
■Height 50.0mm
■Wheelbase 94.0mm（L）
■Tread F : 59.5mm R : 59.5mm
■Tire F : Φ25.0mm×8.5mm R : Φ25.0mm×8.5mm
■Gear ratio 7.23、6.38、5.71、5.97、5.34、4.97、4.5：1
■Front Wheel Offset Narrow+1.5mm
■Front Wheel Offset Wide +1.5mm
■R/C System Syncro KT-531P
■Weight 193g

<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

[Contents]
・ Motor checker body
・ Power cable with super plug ・
O-ring for fixing motor x2 (1 is spare)
・ Rotation adapter x2 (1 is spare)
・ Wiring cable with alligator clip for brush motor
・ Instruction instructions book

[Items that need to be purchased separately] -Battery
motor or brushless motor for minutes (measurement target)
-Battery with super plug from 5.5V to 7.4V (maximum voltage up to 8.4V)
  or MZW124-02 AC adapter (6V- 2A / For Japan)

Steering plate set. 5 kinds of toe angles can be selected for wider setup range.

Recommended Stand for working on the damper. The magnet plate on the front will help preventing to lost screws.

■Length 167.0mm
■Width 70.0mm
■Height 46.0mm
■Chassis MA-020-N
■Wheelbase 94.0mm（L）
■Tread F : 59.5mm R : 59.5mm
■Tire F : Φ25.0mm×8.5mm R : Φ25.0mm×8.5mm
■Gear ratio 7.23、6.38、5.71、5.97、5.34、4.97、4.5：1
■Front Wheel Offset Narrow +1.5mm
■Rear Wheel Offset Narrow +1.5mm
■R/C System Syncro KT-531P
■Weight 193g

<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 172.5mm
■Width 75.0mm
■Height 49.0mm
■Wheelbase 98.0mm （LL）
■Tread F:64.5mm R:62.0mm
■Chassis RWD (MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +1.5mm (for RWD)
■Rear Wheel Offset Wide +1.5mm (for RWD)
■R/C System Syncro KT-531P

<Readyset Contents>
●Factory assembled chassis 
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels

<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 172.5mm
■Width 75.0mm
■Height 49.0mm
■Wheelbase 98.0mm （LL）
■Tread F:64.5mm R:62.0mm
■Chassis RWD (MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +1.5mm (for RWD)
■Rear Wheel Offset Wide +1.5mm (for RWD)
■R/C System Syncro KT-531P

<Readyset Contents>
●Factory assembled chassis 
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels

<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■ Input voltage USB Type-C 5-12V (Power supply with output 3A or more compatible with Quick Charge 2.0 / 3.0 and Power Delivery is recommended)
* Please purchase the charging adapter separately.
■ Body size 120x92x34 (mm)
■ Weight 195g
■ Number of charging 1-4
■ Compatible batteries NiMH, NiZn, Li-Ion, LiHV, LiFe AAA type (AAA), AA type (AA), 10440, 10500, 12500 , 13500, 13650, 14500, 14650, 16650, 17650, 17670, 18650, 18700, 20650, 20700, 21700, 22650, 26650, 26700 * Batteries longer than 70mm cannot be used

■Length 155.0mm
■Width 68.0mm
■Height 51.0mm
■Chassis MA-020-N
■Wheelbase 90.0mm（M）
■Tread F : 58.5mm R : 58.5mm
■Tire F : Φ25.0mm×8.5mm R : Φ25.0mm×8.5mm
■Gear ratio 7.23、6.38、5.71、5.97、5.34、4.97、4.5：1
■Front Wheel Offset Narrow +1.0mm
■Rear Wheel Offset Narrow +1.0mm
■R/C System Syncro KT-531P
■Weight 193g

<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 161.0mm
■Width 67.0mm
■Height 43.0mm
■Chassis MA-020-N
■Wheelbase 90.0mm（M）
■Tread F : 56.5mm R : 56.5mm
■Tire F : Φ25.0mm×8.5mm R : Φ25.0mm×8.5mm
■Gear ratio 7.23、6.38、5.71、5.97、5.34、4.97、4.5：1
■Front Wheel Offset Narrow +0.0mm
■Rear Wheel Offset Narrow +0.0mm
■R/C System Syncro KT-531P
■Weight 192g

<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 180.0mm
■Width 78.0mm
■Height 40.0mm
■Wheelbase 102.0mm （3L）
■Tread Wide
■Chassis RWD(MR-03)
■Motor Mount LM
■Front Wheel Offset Narrow+1.5mm(for RWD)
■Rear Wheel Offset Wide +-0.0mm(for RWD)
■R/C System Syncro KT-531P

<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels
●Mini pylons

<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length  123.5mm
■Width   70～76mm
■Height  35mm
■Motor Mount MM
■Wheelbase   98.0mm (LL)
■Tread F：61.5～65.0mm／R：61.5～65.0mm
■Tires (F/R) φ25×8.5mm (sold separately)/φ25×8.5〜11mm (sold separately)
■Gear Ratio  7.3、6.3、5.5、4.9：1
■Weight 135g (Body / tires / wheels not included, battery included.)
■Motor  KYOSHO SPEED HOUSE XSPEED 85 (KV8500)

■Length 461mm

■Width 195mm(Body width:210mm)
■Wheelbase 260mm
■Tread (F/R) F：167mm／R：167mm
■Tires (F/R) F：φ64×27.7mm／R：φ64×27.7mm
■Gear Ratio 6.54：1
■Weight  1650g (approx.)
■R/C system      Syncro KT-231P+
■Motor      G14L

■Length: 612mm
■Width: 130mm
■Height: 1,135mm
■Weight: 1,050g
■Sail Area: 21.85dm2

■Overall length 177mm 
■ Overall width 78mm
■ Overall height 47.5mm
■ Overall weight 130g
■ Wheel base
98mm (LL) ■ Tread F: 67.5mm R: 65.0mm
■ Used chassis RWD (MR-03)
■ Motor mount MM
■ Front wheel offset narrow + 3.0mm (for RWD)
■ Rear wheel offset wide + 3.0mm (for RWD)
■ Used radio Syncro KT-531P

■Length 515mm
■Width 310mm
■Height 135mm
■Wheelbase 360mm
■Tread（Ｆ／Ｒ） 262mm／265mm
■Tire（Ｆ／Ｒ） Φ97mm ×40mm
■Gear Ratio 1st gear /10.14:1　2nd gear /7.49:1
■Weight 3,650g（approx. ）
■Engine　KE25SP
■Transmitter　Syncro KT-331P

Kit Content

●Pre-assembled chassis installed with 2-ch, 2-servo R/C system and pre-set control linkages
●Pre-painted factory assembled body with decals applied
●Installed KE25SP rear exhaust engine
●Installed polished tuned muffler
●Syncro KT-331P transmitter
●Hex wrenches: 1.5, 2.0, 2.5, 3.0mm
●Cross wrench (large)
●17mm wheel wrench
●Nylon strap (for air cleaner)
●Break in ring
●Bind code

Required to run

●8 x AA batteries for transmitter (4) and receiver (4)
●Fuel
●Engine starting tools (fuel bottle, plug heater)

■Length 166.0mm
■Width 78.0mm
■Height 44.0mm
■Wheelbase 98.0mm （LL）
■Tread F:65.5mm R:65.0mm
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +2.5mm(for RWD)
■Rear Wheel Offset Wide +3.0mm(for RWD)
■R/C System Syncro KT-531P

<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels

<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 177.0mm
■Width 76.5mm
■Height 45.0mm
■Wheelbase 98.0mm （LL）
■Tread F:64.5mm R:64.0mm
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +1.5mm(for RWD)
■Rear Wheel Offset Wide +2.5mm(for RWD)
■R/C System Syncro KT-531P

<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels

<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter