●Scale: Approximately 1/28 scale
●Product size：L183 x H76x D82（mm）
●Product weight：144g (approx.)
●Package size：W215 × H225 × D115（mm）
●Package weight：407g (approx.)
●Maximum speed: Training mode: 7km/h Racing mode: 10km/h
●Operation distance: approx. 30m
●Frequency: 2.4GHz (12 vehicles can run simultaneously)
●Continuous running time: Approximately 60 minutes (when using new alkaline batteries)
●Target age: 6 years old or older

<Required to run>
●AAA-size alkaline batteries x 2 for chassis (sold separately)
●AAA-size alkaline batteries x 2 for transmitter (sold separately)

●Scale: Approximately 1/28 scale
●Product size：L160 x H50.5 x D73.9（mm）
●Product weight：109g (approx.)
●Package size：W215 × H225 × D115（mm）
●Package weight：Approximately 343g
●Maximum speed: Training mode: 7km/h Racing mode: 10km/h
●Operation distance: approx. 30m
●Frequency: 2.4GHz (12 vehicles can run simultaneously)
●Continuous running time: Approximately 60 minutes (when using new alkaline batteries)
●Target age: 6 years old or older

<Kit Content>
●Main unit
●2.4GHz controller with stopwatch
●Mini pylons (6 pieces)
●Trim adjuster
●Battery holder
●Seal

<Required to run>
●AA-size alkaline batteries x 2 for chassis (Not included)
●AA-size alkaline batteries x 2 for transmitter (Not included)

For the MR-04 EVO2 chassis. Friction shock for the MR-04MM, featuring carbon plates. It contributes to improved vehicle stability at high speeds. The set includes three springs of varying stiffness levels. The friction shock is compatible with the standard pitching shock and the MZW432B rear oil shock. It can also be used with the MZW708 aluminum oil shock mount.

Optional parts for the 1/8 Inferno MP10 Buggy series. The standard knuckle has a kingpin angle of 0°, while this set features knuckles with 7°kingpin angle. This design reduces front tire catching, particularly in high-speed corners, allowing for higher cornering speeds. It also improves stability, enabling the vehicle to better absorb sudden movements caused by surface gaps or irregularities.

■Scale: Approximately 1/28 scale
■Total length: 130mm
■Total width: 70mm
■Total height: 35mm
■Weight: Approximately 110g (excluding AA alkaline batteries)
■Maximum speed: Training mode: 7km/h Racing mode: 10km/h
■Operating distance: Approximately 30m
■Frequency: 2.4GHz (12 units can run simultaneously)
■Continuous running time: Approximately 60 minutes (when using new alkaline batteries)
■Recommended age: 6 years old and above

<Set contents>
● First Minute main unit
● 2.4GHz controller with stopwatch
● Mini pylon (6 pieces)
● Sticker
● Trim adjuster
● Battery holder

<Required to run>
Main unit: 2 AA alkaline batteries
Transmitter: 2 AA alkaline batteries

■Scale: Approximately 1/28 scale
■Total length: 130mm
■Total width: 70mm
■Total height: 35mm
■Weight: Approximately 110g (excluding AA alkaline batteries)
■Maximum speed: Training mode: 7km/h Racing mode: 10km/h
■Operating distance: Approximately 30m
■Frequency: 2.4GHz (12 units can run simultaneously)
■Continuous running time: Approximately 60 minutes (when using new alkaline batteries)
■Recommended age: 6 years old and above

<Set contents>
● First Minute main unit
● 2.4GHz controller with stopwatch
● Mini pylon (6 pieces)
● Sticker
● Trim adjuster
● Battery holder

<Required to run>
Main unit: 2 AA alkaline batteries
Transmitter: 2 AA alkaline batteries

■Scale: Approximately 1/28 scale
■Total length: 130mm
■Total width: 70mm
■Total height: 35mm
■Weight: Approximately 110g (excluding AA alkaline batteries)
■Maximum speed: Training mode: 7km/h Racing mode: 10km/h
■Operating distance: Approximately 30m
■Frequency: 2.4GHz (12 units can run simultaneously)
■Continuous running time: Approximately 60 minutes (when using new alkaline batteries)
■Recommended age: 6 years old and above

<Set contents>
● First Minute main unit
● 2.4GHz controller with stopwatch
● Mini pylon (6 pieces)
● Sticker
● Trim adjuster
● Battery holder

<Required to run>
Main unit: 2 AA alkaline batteries
Transmitter: 2 AA alkaline batteries

0.5mm-thick FRP rear suspension plate set. Contains soft, medium and hard plates. Softer than the MZW409, which is 0.6mm thick.

Carbon rear suspension plate for MM/LM/MM2. Contains 3 pcs of soft plates.

Aluminum motor mount for the MR-03LM.
High precision machined product made in Japan.
Highly balanced left-right weight distribution contributes to superior traction.
The design supports the LL (98mm) wheelbase as well.  Works best with the MZW310 Inner Tube Roll Shock Set.

Optional parts for MR-04.

Optional parts for MR-04 EVO2

Optional parts for MR-04 EVO2

Spare parts for MR-04 EVO2

Spare parts for MR-04 EVO2

Spare parts for MR-04 EVO2

Optional parts for the INFERNO MP9/MP10. Reinforced Servo Saver than existing one, increases the hardness and steering response.

Spare parts for INFERNO MP10e Readyset

Option Parts for INFERNO MP9
Shock cap set to change the existing MP9 damper to aeration type. For 1 car.
Features of the aeration type are excellent in absorbing gap of fine road surface, and improve the grip feeling and advancing force.

■Length 165.0mm
■Width 71.0mm
■Height 50.0mm
■Wheelbase 94.0mm（L）
■Tread F : 59.5mm R : 59.5mm
■Chassis MA-020-N
■Front Wheel Offset Narrow +1.5mm
■Rear Wheel Offset Narrow +1.5mm
■R/C System Syncro KT-531P

<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 165.0mm
■Width 71.0mm
■Height 50.0mm
■Wheelbase 94.0mm（L）
■Tread F : 59.5mm R : 59.5mm
■Chassis MA-020-N
■Front Wheel Offset Narrow +1.5mm
■Rear Wheel Offset Narrow +1.5mm
■R/C System Syncro KT-531P

<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Overall length 180.0mm
■Overall width 78.0mm
■Overall height 40.0mm
■Wheelbase 102.0mm (3L) ■
Tread Wide
■Chassis used RWD (MR-03)
■Motor mount LM
■Front wheel offset Narrow +1.5mm
■Rear wheel offset Wide + -0.0mm
■Used radio Syncro KT-531P

<Ready set contents>
●Factory-assembled chassis
●Factory-assembled plastic body with painting and markings
●Syncro KT-531P 2.4GHz transmitter
●Set of parts for changing front tread ●Front
suspension spacer for adjustment
●6T/7T/8T/9T pinion gear
●Wheels Wrench
● Pinion removal tool
● Spare wheel nut
● Pairing stick
● Tire and wheel included

<Things required for driving>
●4 AAA alkaline batteries for running
●4 AAA alkaline or nickel metal hydride batteries for transmitter

■Operating Voltage: 4.8-6.0V
■Size：L35.9mm W15.1mm H28.6mm
■Speed：0.13sec/60°
■Torque：4.5kgf・cm
■Weight：30g
■Led Wire：150mm
■Serration：25 / for FUTABA・KYOSHO

・Servo x1
・Horn A x1
・Horn B x1
・Horn C x1
・3ｘ5ｘ1mm Spacer x1
・Eyeletｘ4
・Screw 2.3x12mm x4
・Screw 2.6ｘ6ｍｍｘ1
・Grommetｘ4

■Length 182.0mm
■Width 78.0mm
■Height 43.0mm
■Wheelbase 98.0mm （LL）
■Tread F:66.5mm R:65.0mm
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +2.5mm(for RWD)
■Rear Wheel Offset Wide +3.0mm(for RWD)
■Weight 130g
■R/C System Syncro KT-531P

<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels

<Required for Operation>
●AAA-size alkaline batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for transmitter

■Length 165.0mm
■Width 70.0mm
■Height 46.0mm
■Weight 193g
■Wheelbase 94.0mm（L）
■Tread F : 59.5mm R : 59.5mm
■Chassis MA-020-N
■Front Wheel Offset Narrow +1.5mm
■Rear Wheel Offset Narrow +1.5mm
■R/C System Syncro KT-531P

<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

Machined aluminum upper sus arm realizes direct spring effect.

■Length 163.0mm
■Width 67.0mm
■Height 51.0mm
■Wheelbase 94.0mm（L）
■Tread F : 56.5mm R : 56.5mm
■Chassis MA-020-N
■Front Wheel Offset Narrow +-0.0mm
■Rear Wheel Offset Narrow +-0.0mm
■R/C System Syncro KT-531P

<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 163.0mm
■Width 67.0mm
■Height 51.0mm
■Wheelbase 94.0mm（L）
■Tread F : 56.5mm R : 56.5mm
■Chassis MA-020-N
■Front Wheel Offset Narrow +-0.0mm
■Rear Wheel Offset Narrow +-0.0mm
■R/C System Syncro KT-531P

<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 175.0mm
■Width 72.8mm
■Height 52.0mm
■Weight 180g
■Wheelbase 90.0mm（M）
■Tread F : 56.5mm R : 56.5mm
■Chassis MA-020-N
■Front Wheel Offset Narrow +-0.0mm
■Rear Wheel Offset Narrow +-0.0mm
■R/C System Syncro KT-531P

<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 175.0mm
■Width 72.8mm
■Height 52.0mm
■Weight 180g
■Wheelbase 90.0mm（M）
■Tread F : 56.5mm R : 56.5mm
■Chassis MA-020-N
■Front Wheel Offset Narrow +-0.0mm
■Rear Wheel Offset Narrow +-0.0mm
■R/C System Syncro KT-531P

<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 181.2mm
■Width 78.0mm
■Height 47.75mm
■Wheelbase 98.0mm （LL）
■Tread F:66.5mm R:65.0mm
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +2.5mm(for RWD)
■Rear Wheel Offset Wide +3.0mm(for RWD)
■R/C System Syncro KT-531P

<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels

<Required for Operation>
●AAA-size alkaline batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for transmitter

■Length 173.0mm
■Width 78.0mm
■Height 45.0mm
■Wheelbase 98.0mm （LL）
■Tread F:67.5mm R:65.0mm
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +3.0mm(for RWD)
■Rear Wheel Offset Wide +3.0mm(for RWD)
■Weight 169g
■R/C System Syncro KT-531P

<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels

<Required for Operation>
●AAA-size alkaline batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for transmitter

■Length 173.0mm
■Width 78.0mm
■Height 45.0mm
■Wheelbase 98.0mm （LL）
■Tread F:67.5mm R:65.0mm
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +3.0mm(for RWD)
■Rear Wheel Offset Wide +3.0mm(for RWD)
■Weight 169g
■R/C System Syncro KT-531P

<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels

<Required for Operation>
●AAA-size alkaline batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for transmitter

■Length 155.0mm
■Width 70.0mm
■Height 50.0mm
■Wheelbase 90.0mm（M）
■Tread F : 57.5mm R : 57.5mm
■Tire F : Φ25.0mm×8.5mm R : Φ25.0mm×8.5mm
■Gear ratio 7.23、6.38、5.71、5.97、5.34、4.97、4.5：1
■Front Wheel Offset Narrow +0.5mm
■Rear Wheel Offset Narrow +0.5mm
■R/C System Syncro KT-531P
■Weight 193g

<Readyset Contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 155.0mm
■Width 71.0mm
■Height 48.0mm
■Wheelbase 90.0mm（M）
■Tread F : 58.5mm R : 58.5mm
■Tire F : Φ25.0mm×8.5mm R : Φ25.0mm×8.5mm
■Gear ratio 7.23、6.38、5.71、5.97、5.34、4.97、4.5：1
■Front Wheel Offset Narrow +1.0mm
■Rear Wheel Offset Narrow +1.0mm
■R/C System Syncro KT-531P
■Weight 193g

<Readyset Contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

Option Parts for ULTIMA RB6

Machined aluminum wheel hub. Increased durability.

Spare parts for MAD WAGON

Option parts for the Fazer Mk2. CNC machined aluminum front hubs allow precise and linerar steering response and smooth suspensionmovement. Allows camber angle adjustments.

Option parts for the Fazer Mk2. CNC machined aluminum rear hubs allow smoother suspension movement. Allows 2 camber angle adjustments.

■Size
Overall：W360 X L560 X H550(mm)
Inner dimensions of one of the inner boxes：W325 X L505 X H160(mm)

■Carrying Bag for1/8
■Considerable materials for heavy duty use.
■Chic black color.
■Plastic cardboard for shelves
■Outside pocket equipped.
■Equipped with multipurpose slit and travel carrier.

Spare parts for MAD WAGON

Spare parts for MAD WAGON

Spare parts for MAD WAGON

Spare parts for MAD WAGON

Option Parts for INFERNO GT2 Type-R.

Spare Parts for SCORPION 2014

High RPM and torque .21 size big block engine. Easy to tune with recoil starter.

*This product does not come with a break-in ring.When you break in, please use the accessories that came with the Readyset when you purchased it.

Gyro unit for MINI-Z readyset. Compatible with blue board RC units, or green board RC units with a blue marking on the gyro connector.

Correspondence table

Complete body set for the Inferno GT2. Licensed 2020 Mercedes AMG GT3 body. Wheelbase : 360mm / Body Dimensions : 661 x 310 x 164mm(With rear wing)

Aluminum big bore shocks for Rage 2.0. Threaded large capacity shock bodies.

＜CHASSIS SET CONTENTS＞
●Factory-assembled chassis equipped with EVO main unit installed
●Pinion Gears (15T, 17T, 19T, 21T)
●DWS conversion parts *Front tread conversion parts
●Pinion gear removal tool
●Spare wheel nuts
●Wheel wrench
●Center shaft for L wheelbase
●Wide rear suspension arms for DWS
●swing shafts (4 x long)
●Spur gears (27T, 29T, 31T)

Required to run

●8 x AAA batteries
●Auto Scale Collection (body, wheels and tires)
●Transmitter
●MINI-Z EVO receiver unit compatible with the transmitter used

■Length 160.0mm

■Width 71.0mm
■Height 53.0mm
■Wheelbase 94.0mm（L）
■Tread F : 58.5mm R : 58.5mm
■Tire F : Φ25.0mm×8.5mm R : Φ25.0mm×8.5mm
■Gear ratio 7.23、6.38、5.71、5.97、5.34、4.97、4.5：1
■Front Wheel Offset Narrow +1.0mm
■Rear Wheel Offset Narrow +1.0mm
■R/C System Syncro KT-531P
■Weight 170g

<Readyset Contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 161.0mm
■Width 70.0mm
■Height 51.5mm
■Wheelbase 90.0mm（M）
■Tread F : 58.5mm R : 58.5mm
■Tire F : Φ25.0mm×8.5mm R : Φ25.0mm×8.5mm
■Gear ratio 7.23、6.38、5.71、5.97、5.34、4.97、4.5：1
■Front Wheel Offset Narrow +1.0mm
■Rear Wheel Offset Narrow +1.0mm
■R/C System Syncro KT-531P
■Weight 170g

<Readyset Contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 161.0mm
■Width 70.0mm
■Height 51.5mm
■Wheelbase 90.0mm（M）
■Tread F : 58.5mm R : 58.5mm
■Tire F : Φ25.0mm×8.5mm R : Φ25.0mm×8.5mm
■Gear ratio 7.23、6.38、5.71、5.97、5.34、4.97、4.5：1
■Front Wheel Offset Narrow +1.0mm
■Rear Wheel Offset Narrow +1.0mm
■R/C System Syncro KT-531P
■Weight 170g

<Readyset Contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 156.0mm
■Width 70.0mm
■Height 49.0mm
■Wheelbase 90.0mm （M）
■Tread F:59.5mm R:57.0mm
■Chassis RWD(MR-03)
■Motor Mount RM
■Front Wheel Offset Narrow +1.5mm(for RWD)
■Rear Wheel Offset Wide -1.0mm(for RWD)
■R/C System Syncro KT-531P
■Weight 162g (approx.)

<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels

<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter

■Length 156.0mm
■Width 70.0mm
■Height 49.0mm
■Wheelbase 90.0mm （M）
■Tread F:59.5mm R:57.0mm
■Chassis RWD(MR-03)
■Motor Mount RM
■Front Wheel Offset Narrow +1.5mm(for RWD)
■Rear Wheel Offset Wide-1.0mm(for RWD)
■R/C System Syncro KT-531P
■Weight 162g (approx.)

<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels

<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter