There are 4641 products.
Active filters
Mini steering servo for the Hang On Racer. Bolt on ready. 150mm wire with JR type no flange connector housing. Screw and aluminum collar included.
■Length 563mm
■Width 414mm
■Wheelbase 384-389mm
■Tread（F/R） 353mm(approx)
■Tires（F/R） For stadium track(Sold separately)
■Gear Ratio 14.12:1
■Weight 4,200g (approx)
■Transmitter 2ch or more 1 servo /1 ESC(Sold separately)
＜Kit Contents＞
●Unassembled chassis kit
●Clear body
●Decals
● Hexagonal wrench (1.5mm、2.0mm、2.5mm、3.0mm)
●Cross wrench
●17mm wheel wrench
＜Required for Operation＞
●2ch～3ch transmitter & receiver for R/C cars
●Servo (high torque servo recommended)
●Motor(for 1/8)
●ESC
●Battries for chassis(7.4vLipox2 Recommendation）
●Charger
●Stadium truck tire
●Wheel
●Inner sponge
●Color for body painting
■Length 167.0mm
■Width 70.0mm
■Height 52.0mm
■Wheelbase 98.0mm（LL）
■Tread F : 59.5mm R : 59.5mm
■Tire F : Φ25.0mm×8.5mm R : Φ25.0mm×8.5mm
■Gear ratio 7.23、6.38、5.71、5.97、5.34、4.97、4.5：1
■Front Wheel Offset Narrow +1.5mm
■Rear Wheel Offset Narrow +1.5mm
■R/C System Syncro KT-531P
■Weight 193g
<Readyset Contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool
<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter
■Length 167.0mm
■Width 70.0mm
■Height 52.0mm
■Wheelbase 98.0mm（LL）
■Tread F : 59.5mm R : 59.5mm
■Tire F : Φ25.0mm×8.5mm R : Φ25.0mm×8.5mm
■Gear ratio 7.23、6.38、5.71、5.97、5.34、4.97、4.5：1
■Front Wheel Offset Narrow +1.5mm
■Rear Wheel Offset Narrow +1.5mm
■R/C System Syncro KT-531P
■Weight 193g
<Readyset Contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool
<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter
■Length 500mm
■Width 210mm(Body width * excluding mirror)
■Height 136mm
■Chassis Height 8mm(approx.)
■Wheelbase 274mm
■Tread (F/R) 167mm
■Tires (F/R) φ64×27.7mm
■Gear Ratio 6.54：1
■Weight 1650g (approx.)
■R/C system &; Syncro KT-231P+
■Motor G14L
<Kit Contents>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts
<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools
■Length 461mm
■Width (Body width * excluding mirror) 210mm
■Height 138mm
■Chassis Height 15mm(approx.)
■Wheelbase 260mm
■Tread (F/R) 167mm
■Tires (F/R) Fφ64×27.7mm
■Gear Ratio 6.54：1
■Weight 1610g (approx.)
■R/C system Syncro KT-231P+
■Motor TORX10E
<Kit Content>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts
<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools
■Length 168.0mm
■Width 79.0mm
■Height 46.5mm
■Wheelbase 98.0mm （LL）
■Tread F:65.5mm R:65.0mm
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +2.0mm(for RWD)
■Rear Wheel Offset Wide +3.0mm(for RWD)
■R/C System Syncro KT-531P
<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels
<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter
■Length 177.0mm
■Width 76.5mm
■Height 45.0mm
■Wheelbase 98.0mm （LL）
■Tread F:64.5mm R:64.0mm
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +1.5mm(for RWD)
■Rear Wheel Offset Wide +2.5mm(for RWD)
■R/C System Syncro KT-531P
<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels
<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter
■Length 177.0mm
■Width 76.5mm
■Height 45.0mm
■Wheelbase 98.0mm （LL）
■Tread F:64.5mm R:64.0mm
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +1.5mm(for RWD)
■Rear Wheel Offset Wide +2.5mm(for RWD)
■R/C System Syncro KT-531P
<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels
<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter
■Length 452mm
■Width 192mm(* Excluding mirrors)
■Height 135mm
■Chassis Height 8mm(approx.)
■Wheelbase 274mm
■Tread (F/R) 174mm
■Tires (F/R) φ66×25mm
■Gear Ratio 6.54：1
■Weight 1650g (approx.)
■R/C system &; Syncro KT-231P+
■Motor G14L
<Kit Contents>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts
<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools
■Length 171.0mm
■Width 75.0mm
■Height 50.0mm
■Chassis MA-020-W
■Wheelbase 98.0mm（LL）
■Tread F : 64.5mm R : 62.0mm
■Tire F : Φ25.0mm×8.5mm R : Φ25.0mm×11.0mm
■Gear ratio 7.23、6.38、5.71、5.97、5.34、4.97、4.5：1
■Front Wheel Offset Narrow +1.5mm
■Rear Wheel Offset Wide +1.5mm
■R/C System Syncro KT-531P
■Weight 193g
<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool
＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter
■Length 171.0mm
■Width 75.0mm
■Height 50.0mm
■Chassis MA-020-W
■Wheelbase 98.0mm（LL）
■Tread F : 64.5mm R : 62.0mm
■Tire F : Φ25.0mm×8.5mm R : Φ25.0mm×11.0mm
■Gear ratio 7.23、6.38、5.71、5.97、5.34、4.97、4.5：1
■Front Wheel Offset Narrow +1.5mm
■Rear Wheel Offset Wide +1.5mm
■R/C System Syncro KT-531P
■Weight 193g
<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool
＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter
■Length 181.2mm
■Width 78.0mm
■Height 47.75mm
■Wheelbase 98.0mm （LL）
■Tread F:66.5mm R:65.0mm
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +2.5mm(for RWD)
■Rear Wheel Offset Wide +3.0mm(for RWD)
■R/C System Syncro KT-531P
<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels
<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter
■Length 177mm
■Width 76.5mm
■Height 45.0mm
■Wheelbase 98.0mm （LL）
■Tread Wide
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +2.0mm(for RWD)
■Rear Wheel Offset Wide +2.0mm(for RWD)
■R/C System Syncro KT-531P
<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels
●Mini pylons
<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter
■Length 490mm
■Width 307mm
■Height 180mm
■Ground clearance 28mm
■Wheelbase 325mm
■Tread（Ｆ／Ｒ） 254mm
■Tires（Ｆ／Ｒ） sold separately
■Gear Ratio 12.1：1
■Weight 3,360g(approx.)
■Engine 21Class (sold separately)
＜Kit Contents＞
●Unassembled chassis kit
●Special wheels
●Wing
●Special clear body
●Window mask seal
●Fuel tube
●Linkage parts
●Clutch parts
●Air cleaner
●Logo decals
●Commemorative decal
●Ring gear grease
●1.5, 2.0, 2.5mm Hexagonal wrench
●Cross wrench
●Wheel wrench
＜Required for Operation＞
●2-channel 2-servo R/C system for cars
●Compatible batteries for R/C system
●21 engine
●Muffler
●Tires w/foam inserts for 1/8 buggy
●Starter box
●Plug heater
●Fuel
●Fuel bottle
●Oil for air cleaner
●Shock oil
●Diff oil
●Paint for car body
●Tools
■Length 375mm
■Width 244mm
■Height 142mm
■Wheelbase 255mm
■Tread (F/R) 208mm
■Weight approx1,600g(with 7.2V4000 LiPo)
■Tires (F/R) φ82×36mm
■Motor 540 class size (sold separately)
■Gear ratio 8.28：1
<Kit Contents>
●Kit chassis
●Tire
●Wheel (white)
●Clear body
●Wing (white)
●Mask sheet
●Decals
●hexagon wrench
●Cross wrench
●Shock wrench
●Grease
●Shock oil
<Required for Operation>
●2 channel R/C system
●Servo
●540Motor
●ESC
●210mm Sensor cable
●Battery for chassis（7.4V Ni-MH battery or 7.4V Li-Po battery）
●Charger for battery for chassis
●Batteries for transmitter
■Length 455mm
■Width（Body width） 200mm（210mm）
■Height 120mm
■Wheelbase 260mm
■Tread (F/R)：174mm
■Tires (F/R)：φ63.2×24.2mm
■Gear Ratio 6.54：1
■Weight 1650g(approx.)
■Syncro KT-231P+ transmitter
■Motor G14L
<Kit Contents>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
● Setting change parts
<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools
■Length 507mm
■Width 195mm(Body width:210mm)
■Height 128mm
■Chassis Height 15mm(approx.)
■Wheelbase 274mm
■Tread (F/R) 167mm
■Tires (F/R) Fφ64×27.7mm
■Gear Ratio 6.54：1
■Weight 1680g (approx.)
■R/C system Syncro KT-231P+
■Motor TORX10E
<Kit Content>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts
<Require to run>
<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools
■ Overall length 177mm
■ Overall width 78mm
■ Overall height 47.5mm
■ Overall weight 130g
■ Wheel base 98mm (LL)
■ Tread F: 67.5mm R: 65.0mm
■ Used chassis RWD (MR-03)
■ Motor mount MM
■ Front wheel offset narrow + 3.0mm (for RWD)
■ Rear wheel offset wide + 3.0mm (for RWD)
■ Used radio Syncro KT-531P
<Ready set contents>
● Factory completed chassis
● Painting / marking Factory completed plastic body
● Syncro KT-531P 2.4GHz transmitter
● Front tread change parts set
● Adjustment front suspension spacer
● 6T / 7T / 8T / 9T pinion gear
● Wheel Wrench
● Pinion removal tool
● Spare wheel nut
● Pairing stick
● Tires and wheels included
<Necessary items for driving>
● 4 AAA alkaline or nickel-metal hydride batteries for driving
● 4 AAA alkaline batteries for transmitter
■Length 167.5mm
■Width 70.0mm
■Height 50.0mm
■Wheelbase 94.0mm（L）
■Tread F : 59.5mm R : 59.5mm
■Tire F : Φ25.0mm×8.5mm R : Φ25.0mm×8.5mm
■Gear ratio 7.23、6.38、5.71、5.97、5.34、4.97、4.5：1
■Front Wheel Offset Narrow+1.5mm
■Front Wheel Offset Narrow+1.5mm
■R/C System Syncro KT-531P
■Weight 193g
<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool
＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter
■Length 167.5mm
■Width 70.0mm
■Height 50.0mm
■Wheelbase 94.0mm（L）
■Tread F : 59.5mm R : 59.5mm
■Tire F : Φ25.0mm×8.5mm R : Φ25.0mm×8.5mm
■Gear ratio 7.23、6.38、5.71、5.97、5.34、4.97、4.5：1
■Front Wheel Offset Narrow+1.5mm
■Front Wheel Offset Wide +1.5mm
■R/C System Syncro KT-531P
■Weight 193g
<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool
＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter
Option parts for the TURBO OPTIMA.
Soft compound of 50mm tire. For low grip road surface
[Contents]
・ Motor checker body
・ Power cable with super plug ・
O-ring for fixing motor x2 (1 is spare)
・ Rotation adapter x2 (1 is spare)
・ Wiring cable with alligator clip for brush motor
・ Instruction instructions book
[Items that need to be purchased separately] -Battery
motor or brushless motor for minutes (measurement target)
-Battery with super plug from 5.5V to 7.4V (maximum voltage up to 8.4V)
or MZW124-02 AC adapter (6V- 2A / For Japan)
Steering plate set. 5 kinds of toe angles can be selected for wider setup range.
Recommended Stand for working on the damper. The magnet plate on the front will help preventing to lost screws.
■Length 167.0mm
■Width 70.0mm
■Height 46.0mm
■Chassis MA-020-N
■Wheelbase 94.0mm（L）
■Tread F : 59.5mm R : 59.5mm
■Tire F : Φ25.0mm×8.5mm R : Φ25.0mm×8.5mm
■Gear ratio 7.23、6.38、5.71、5.97、5.34、4.97、4.5：1
■Front Wheel Offset Narrow +1.5mm
■Rear Wheel Offset Narrow +1.5mm
■R/C System Syncro KT-531P
■Weight 193g
<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool
＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter
■Length 172.5mm
■Width 75.0mm
■Height 49.0mm
■Wheelbase 98.0mm （LL）
■Tread F:64.5mm R:62.0mm
■Chassis RWD (MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +1.5mm (for RWD)
■Rear Wheel Offset Wide +1.5mm (for RWD)
■R/C System Syncro KT-531P
<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels
<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter
■Length 172.5mm
■Width 75.0mm
■Height 49.0mm
■Wheelbase 98.0mm （LL）
■Tread F:64.5mm R:62.0mm
■Chassis RWD (MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +1.5mm (for RWD)
■Rear Wheel Offset Wide +1.5mm (for RWD)
■R/C System Syncro KT-531P
<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels
<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter
■ Input voltage USB Type-C 5-12V (Power supply with output 3A or more compatible with Quick Charge 2.0 / 3.0 and Power Delivery is recommended)
* Please purchase the charging adapter separately.
■ Body size 120x92x34 (mm)
■ Weight 195g
■ Number of charging 1-4
■ Compatible batteries NiMH, NiZn, Li-Ion, LiHV, LiFe AAA type (AAA), AA type (AA), 10440, 10500, 12500 , 13500, 13650, 14500, 14650, 16650, 17650, 17670, 18650, 18700, 20650, 20700, 21700, 22650, 26650, 26700 * Batteries longer than 70mm cannot be used
Internal resistance: 0.0011Ω
Continuous maximum current: 60A
Instantaneous maximum current: 80A
Maximum KV value (2S): 13.5T 3200KV
Driving mode: Forward / brake / forward / brake / reverse
Input voltage: 7.2V-11.1V
Compatible motor type: Sensor & Sensorless
BEC output: 6V / 2A
size (mm): 37.5 x 30.8 x 18.7
Weight (g): Approximately 80
■Length 155.0mm
■Width 68.0mm
■Height 51.0mm
■Chassis MA-020-N
■Wheelbase 90.0mm（M）
■Tread F : 58.5mm R : 58.5mm
■Tire F : Φ25.0mm×8.5mm R : Φ25.0mm×8.5mm
■Gear ratio 7.23、6.38、5.71、5.97、5.34、4.97、4.5：1
■Front Wheel Offset Narrow +1.0mm
■Rear Wheel Offset Narrow +1.0mm
■R/C System Syncro KT-531P
■Weight 193g
<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool
＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter
■Length 161.0mm
■Width 67.0mm
■Height 43.0mm
■Chassis MA-020-N
■Wheelbase 90.0mm（M）
■Tread F : 56.5mm R : 56.5mm
■Tire F : Φ25.0mm×8.5mm R : Φ25.0mm×8.5mm
■Gear ratio 7.23、6.38、5.71、5.97、5.34、4.97、4.5：1
■Front Wheel Offset Narrow +0.0mm
■Rear Wheel Offset Narrow +0.0mm
■R/C System Syncro KT-531P
■Weight 192g
<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Ｓyncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool
＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter
■Length 180.0mm
■Width 78.0mm
■Height 40.0mm
■Wheelbase 102.0mm （3L）
■Tread Wide
■Chassis RWD(MR-03)
■Motor Mount LM
■Front Wheel Offset Narrow+1.5mm(for RWD)
■Rear Wheel Offset Wide +-0.0mm(for RWD)
■R/C System Syncro KT-531P
<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels
●Mini pylons
<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter
■Length 123.5mm
■Width 70～76mm
■Height 35mm
■Motor Mount MM
■Wheelbase 98.0mm (LL)
■Tread F：61.5～65.0mm／R：61.5～65.0mm
■Tires (F/R) φ25×8.5mm (sold separately)/φ25×8.5〜11mm (sold separately)
■Gear Ratio 7.3、6.3、5.5、4.9：1
■Weight 135g (Body / tires / wheels not included, battery included.)
■Motor KYOSHO SPEED HOUSE XSPEED 85 (KV8500)
■Length 461mm
■Width 195mm(Body width:210mm)
■Wheelbase 260mm
■Tread (F/R) F：167mm／R：167mm
■Tires (F/R) F：φ64×27.7mm／R：φ64×27.7mm
■Gear Ratio 6.54：1
■Weight 1650g (approx.)
■R/C system Syncro KT-231P+
■Motor G14L
■Overall length 177mm
■ Overall width 78mm
■ Overall height 47.5mm
■ Overall weight 130g
■ Wheel base
98mm (LL) ■ Tread F: 67.5mm R: 65.0mm
■ Used chassis RWD (MR-03)
■ Motor mount MM
■ Front wheel offset narrow + 3.0mm (for RWD)
■ Rear wheel offset wide + 3.0mm (for RWD)
■ Used radio Syncro KT-531P
■Length 515mm
■Width 310mm
■Height 135mm
■Wheelbase 360mm
■Tread（Ｆ／Ｒ） 262mm／265mm
■Tire（Ｆ／Ｒ） Φ97mm ×40mm
■Gear Ratio 1st gear /10.14:1 2nd gear /7.49:1
■Weight 3,650g（approx. ）
■Engine KE25SP
■Transmitter Syncro KT-331P
Kit Content
●Pre-assembled chassis installed with 2-ch, 2-servo R/C system and pre-set control linkages
●Pre-painted factory assembled body with decals applied
●Installed KE25SP rear exhaust engine
●Installed polished tuned muffler
●Syncro KT-331P transmitter
●Hex wrenches: 1.5, 2.0, 2.5, 3.0mm
●Cross wrench (large)
●17mm wheel wrench
●Nylon strap (for air cleaner)
●Break in ring
●Bind code
Required to run
●8 x AA batteries for transmitter (4) and receiver (4)
●Fuel
●Engine starting tools (fuel bottle, plug heater)
■Length 166.0mm
■Width 78.0mm
■Height 44.0mm
■Wheelbase 98.0mm （LL）
■Tread F:65.5mm R:65.0mm
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +2.5mm(for RWD)
■Rear Wheel Offset Wide +3.0mm(for RWD)
■R/C System Syncro KT-531P
<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels
<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter
■Length 177.0mm
■Width 76.5mm
■Height 45.0mm
■Wheelbase 98.0mm （LL）
■Tread F:64.5mm R:64.0mm
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +1.5mm(for RWD)
■Rear Wheel Offset Wide +2.5mm(for RWD)
■R/C System Syncro KT-531P
<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels
<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter
■Length: 570mm
■Width: 450mm
■Height: 281mm
■Weight 5,040g
■Wheelbase: 360mm
■Tread F:339mm R:343mm
■Tire (F＆R):164 x 104mm
■Gear Ratio: 8.68：1
■Motor: KSH TORX 8+ kv2300
＜ Readyset Contents ＞
●Pre-assembled chassis with pre-set control linkages
●Factory assembled printed body
2.4GHz Syncro KT-231P+ transmitter
●L-shape hex wrenches: 1.5, 2.0, 2.5, 3.0mm
●Cross wrench
●17mm wheel wrench
＜ Required for Operation ＞
●4 x AA alkaline batteries for transmitter
●Running battery (2 x 7.2v Ni-MH to 2 x7.4v lipo battery)
●Charger
●Stabilized power supply
■Length 515mm
■Width 310mm
■Height 135mm
■Wheelbase 360mm
■Tread（Ｆ／Ｒ） 262mm／265mm
■Tire（Ｆ／Ｒ） Φ97mm ×40mm
■Gear Ratio 8.95：1
■Weight 3,650g（approx. ）
■Motor KYOSHO SPEED HOUSE TORX8+ brushless motor(kv2300)
■Transmitter Syncro KT-331P
<Readyset Contents>
●Pre-assembled chassis with 2-channel, 1-servo, ESC R/C system installed
●Pre-painted body complete with decals applied
●KYOSHO SPEED HOUSE TORX8+ brushless motor installed
●KYOSHO SPEED HOUSE BRAINZ 8 ESC installed
●Syncro KT-331P transmitter
●Hexagonal wrench: 1.5, 2.0, 2.5, 3.0mm
●Cross wrench (large)
●17mm wheel wrench
<Required for Operation>
●Battery for chassis
●Charger for battery
●4 x AA-size batteries for transmitter
■Length 490mm
■Width 195mm(Body width:208mm)
■Wheelbase 274mm
■Tread (F/R) F：167mm／R：167mm
■Tires (F/R) F：φ64×27.7mm／R：φ64×27.7mm
■Gear Ratio 6.54：1
■Weight 1650g (approx.)
■R/C system Syncro KT-231P+
■Motor G14L
<Kit Contents>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Installed 60A waterproof electronic speed controller (forward/brake/reverse)
●+5mm off-set wheel hub (for 200mm width chassis), M4 x 22 wheel screw
●Hexagonal wrench
●Spanner
<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools
■Length 455mm
■Width（Body width） 200mm（210mm）
■Height 120mm
■Wheelbase 260mm
■Tread (F/R) F：174mm／R：174mm
■Tires (F/R) F：φ64×24.2mm／R：φ64×24.2mm
■Gear Ratio 6.54：1
■Weight 1650g(approx.)
■Syncro KT-231P+ transmitter
■Motor G14L
Spare tires & white wheels for the Mad Van VE. By using with EZT001S, FA535-S20, FA535-76 and 1-S14018H, wheels can be equipped on the Rage 2.0 chassis(34411).
■Length 486mm
■Width （Body width） 190mm（200mm）
■Height 144mm
■Wheelbase 274mm
■Tread (F/R) F：174mm／R：174mm
■Tires (F/R) F：φ66×25mm／R：φ66×25mm
■Gear Ratio 6.5：1
■Weight 1650g (approx.)
■R/C system Syncro KT-231P+
■Motor G14L
■Length 171.0mm
■Width 75.0mm
■Height 50.0mm
■Chassis MA-020-W
■Wheelbase 98.0mm（LL）
■Tread F : 64.5mm R : 62.0mm
■Tire F : Φ25.0mm×8.5mm R : Φ25.0mm×11.0mm
■Gear ratio 7.23、6.38、5.71、5.97、5.34、4.97、4.5：1
■Front Wheel Offset Narrow +1.5mm
■Rear Wheel Offset Wide +1.5mm
■R/C System Syncro KT-531P
■Weight 193g
■Length 171.0mm
■Width 75.0mm
■Height 50.0mm
■Chassis MA-020-W
■Wheelbase 98.0mm（LL）
■Tread F : 64.5mm R : 62.0mm
■Tire F : Φ25.0mm×8.5mm R : Φ25.0mm×11.0mm
■Gear ratio 7.23、6.38、5.71、5.97、5.34、4.97、4.5：1
■Front Wheel Offset Narrow +1.5mm
■Rear Wheel Offset Wide +1.5mm
■R/C System Syncro KT-531P
■Weight 193g
■Length 177mm
■Width 78mm
■Height 47.5mm
■Weight 130g
■Wheelbase 98mm （LL）
■Tread F : 67.5mm R : 65.0mm
■Chassis RWD (MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +3.0mm (for RWD)
■Rear Wheel Offset Wide +3.0mm (for RWD)
■R/C System Syncro KT-531P
■Length 166.0mm
■Width 71.0mm
■Height 50.0mm
■Wheelbase 90.0mm（M）
■Tread F : 59.5mm R : 59.5mm
■Tire F : Φ25.0mm×8.5mm R : Φ25.0mm×8.5mm
■Gear ratio 7.23、6.38、5.71、5.97、5.34、4.97、4.5：1
■Front Wheel Offset Narrow +1.5mm
■Rear Wheel Offset Narrow +1.5mm
■R/C System Syncro KT-531P
■Weight 193g
■Length 500mm
■Width 195mm(Body width:210mm)
■Height 136mm
■Wheelbase 274mm
■Tread (F/R) F：167mm／R：167mm
■Tires (F/R) F：φ64×27.7mm／R：φ64×27.7mm
■Gear Ratio 6.54：1
■Weight 1650g (approx.)
■R/C system Syncro KT-231P+
■Motor G14L
■Length 1300mm
■Width 1600mm
■Weight EP/2,550g (approx.), GP/2,450g (approx.)
■Motor 600-1000W BL Motor (sold separately)
■Engine 2 Cycle 40-46 class engine (sold separately)
■Battery (EP) 14.8V-4,000-5,000mAh Li-Po battery (sold separately)
■Main Wing Area 44dm2
■Wing Loading 55.7-55.9g/dm2
■Airfoil Original semi-symmetrical
■Propeller size D11 x P7-D12 x P8 (sold separately)
■Tire size Nose 60mm / Main 60mm
■Dihedral 2.5°
■Side Thrust 2°
■R/C system (EP) 4ch, 4 servo, 1 ESC (sold separately)
■R/C system (GP) 4ch, 5 servo (sold separately)
■Length: 1,600mm
■Width: 1,800mm
■Weight : (EP) 3,900g (GP) 3,700g
■Motor(EP): 800-1200W class backplate mounted outrunner brushless (sold separately)
■Engine (GP): 2-cycle 60-65 class (sold separately)
■Battery (EP): 14.8V 5,000ｍAh Li-Po (sold separately)
■Wing Area: 60.6dm2
■Wing Load : 61.0-64.3g/dm2
■Wing Type : Original semi-symmetrical
■Propeller : D12xP6-D14xP8 (sold separately)
■Length: 1,600mm
■Width: 1,800mm
■Weight : (EP) 3,900g (GP) 3,700g
■Motor(EP): 800-1200W class backplate mounted outrunner brushless (sold separately)
■Engine (GP): 2-cycle 60-65 class (sold separately)
■Battery (EP): 14.8V 5,000ｍAh Li-Po (sold separately)
■Wing Area: 60.6dm2
■Wing Load : 61.0-64.3g/dm2
■Wing Type : Original semi-symmetrical
■Propeller : D12xP6-D14xP8 (sold separately)
■Length 460mm
■Width 323mm
■Height 197mm
■Wheelbase 274mm
■Tread (F/R) F：250mm／R：250mm
■Tires (F/R) F：φ110×70mm／R：φ110×70mm
■Gear Ratio 11.803:1
■Weight 2180g (approx.)
■R/C system Syncro KT-231P+
■Motor TORX10E (3652 kv4000)
■Length 168.0mm
■Width 79.0mm
■Height 46.5mm
■Wheelbase 98.0mm （LL）
■Tread F:65.5mm R:65.0mm
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +2.0mm(for RWD)
■Rear Wheel Offset Wide +3.0mm(for RWD)
■R/C System Syncro KT-531P
■Length 168.0mm
■Width 79.0mm
■Height 46.5mm
■Wheelbase 98.0mm （LL）
■Tread F:65.5mm R:65.0mm
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +2.0mm(for RWD)
■Rear Wheel Offset Wide +3.0mm(for RWD)
■R/C System Syncro KT-531P
Roll damper for R246-2351 MML Motor Mount. Oil damper is sold separately. Compatible dampers: R246-1360, R246-1221, and MZW432.
Aluminum MM2 type motor mount.
Features:
- Precision lightweight design achieves less than 7g in weight while maintaining sufficient rigidity
- Compatible with R246-1362 roll damper as well as MZ217 standard plastic one
Roll damper for R246-1361 and MZ217 MM2 Motor Mount.
Features:
- Blue anodized precision machined aluminum with shiny finished edges
- Recommended using with R246-1360 oil damper
- Can be assembled in L, LL and 3L wheelbases
■Width 195mm(Body width:210mm)
■Height 136mm
■Wheelbase 274mm
■Tread (F/R) F：167mm／R：167mm
■Tires (F/R) F：φ64×27.7mm／R：φ64×27.7mm
■Gear Ratio 6.54：1
■Weight 1650g (approx.)
■R/C system Syncro KT-231P+
■Motor G14L
■Length 167.5mm
■Width 70.0mm
■Height 50.0mm
■Wheelbase 94.0mm（L）
■Tread F : 59.5mm R : 59.5mm
■Tire F : Φ25.0mm×8.5mm R : Φ25.0mm×8.5mm
■Gear ratio 7.23、6.38、5.71、5.97、5.34、4.97、4.5：1
■Front Wheel Offset Narrow +1.5mm
■Rear Wheel Offset Narrow +1.5mm
■R/C System Syncro KT-531P
■Weight 193g
■Length 167.5mm
■Width 70.0mm
■Height 50.0mm
■Wheelbase 94.0mm（L）
■Tread F : 59.5mm R : 59.5mm
■Tire F : Φ25.0mm×8.5mm R : Φ25.0mm×8.5mm
■Gear ratio 7.23、6.38、5.71、5.97、5.34、4.97、4.5：1
■Front Wheel Offset Narrow +1.5mm
■Rear Wheel Offset Narrow +1.5mm
■R/C System Syncro KT-531P
■Weight 193g
■Length 490mm
■Width 307mm
■Height 180mm
■Ground clearance 28mm
■Wheelbase 325mm
■Tread（Ｆ／Ｒ） 254mm
■Tires（Ｆ／Ｒ） sold separately
■Gear Ratio 12.1：1
■Weight 3,360g(approx.)
■Engine 21Class (sold separately)
■Length 165.0mm
■Width 71.0mm
■Height 50.0mm
■Wheelbase 94.0mm（L）
■Tread F : 59.5mm R : 59.5mm
■Tire F : Φ25.0mm×8.5mm R : Φ25.0mm×8.5mm
■Front Wheel Offset Narrow +1.5mm
■Rear Wheel Offset Narrow +1.5mm
■R/C System Syncro KT-531P
■Weight 193g
■Length: 550mm
■Width: 410mm
■Height: 210mm
■Wheelbase: 355mm
■Tread (F/R): 345mm / 345mm
■Tire (F/R): 148 x 66mm / 148 x 66mm
■Gear Ratio: 17.2：1
■Weight: 4,650g
■Motor: KSH TORX 8 kv2000
■ Number of channels 4 channels
■ Weight 398g
■ Power supply 4 AA alkaline batteries
■ Compatible model Car & boat
■ RF range 2.405-2.475GHz
■ 2.4GHz system FHS (MINI-Z) / FHSS 1Way (KR-331) / FHSS 2Way (KR-431T)
■ Low voltage warning 3.7V or less
■ Steering range 66 ° (45 ° left and right)
■ Throttle range 45 ° (front and rear angle 30 °)
■ Certification CE0678.FCC
Spare air cleaner for the KE21SP/KE25SP engine
Spare parts for the MAD CRUSHER / FO-XX. Included Front Housing parts and screws as 1 set. Not compatible with MA002, MA004F and MA331.
Mercedes AMG GT3 white body for the MINI-Z MR-03 series
■Overall length 162.0mm
■ Overall width 70.0mm
■ Overall height 53.0mm
■ Wheelbase 90.0mm (M)
■ Tread F: 59.5mm R: 59.5mm
■ Chassis used MA-020-N
■ Front wheel offset Narrow + 1.5mm
■ Rear wheel offset Wide + 1.5mm
■ Used radio Syncro KT-531P
■Length 172.5mm
■Width 75mm
■Height 49.0mm
■Wheelbase 98mm （LL）
■Chassis RWD (MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +1.5mm (for RWD)
■Rear Wheel Offset Wide +1.5mm (for RWD)
■R/C System Syncro KT-531P
■Length 172.5mm
■Width 75mm
■Height 49.0mm
■Wheelbase 98mm （LL）
■Chassis RWD (MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +1.5mm (for RWD)
■Rear Wheel Offset Wide +1.5mm (for RWD)
■R/C System Syncro KT-531P
■Length 464mm
■Width 200mm
■Height 123mm
■Wheelbase 258mm
■Tread (F/R) 176mm
■Tire(F/R) φ66×25mm
■Gear Ratio 7.47 / 5.44:1
■Weight 1,800g (approx.)
■Engine KE15SP with recoil starter
■Max Speed 64Km(approx.)
■Length 490mm
■Width 307mm
■Height 180mm
■Wheelbase 325mm (can be changed with rear hub collar)
■Tread (F/R) 254mm
■Tires (F/R) φ116×44mm
■Weight 3370g (approx..)
■Motor KYOSHO SPEED HOUSE TORX 8 Brushless Motor
■Length 469mm
■Width 307mm
■Height 189mm
■Wheelbase 325.5mm
■Tread (F/R) 258mm／261mm
■Tire (F/R) φ116×44mm／φ116×44mm
■Gear Ratio 11.56：1
■Weight 3,400g (approx.)
■Engine KE21SP
■Transmitter 2.4GHz Syncro KT-231P+
Stunning red anodized aluminum link rods for better appearance. For 120mm wheelbase.
Size: 35.8x51.2mm
Shaft size: 3.175x17mm
Weight: Approximately 180g
Number of turns: 21.5T
Operating voltage: Max 12.8V (2 to 3S LiPo compatible)
kv value: 1950 (rpm / V)
Maximum rotation speed (at 7.4V) : 14430rpm
Maximum current: 30A
Maximum output: 260W
Maximum efficiency: 91%
■Length 461mm
■Width 210mm
■Height 135mm
■Wheelbase 258mm
■Tread (F/R) 176mm
■Tire(F/R) φ66×25mm
■Gear Ratio 7.47 / 5.44:1
■Weight 1,800g (approx.)
■Engine KE15SP with recoil starter
■Length 1300mm
■Width 1600mm
■Weight EP/2,550g (approx.), GP/2,450g (approx.)
■Motor 600-1000W BL Motor (sold separately)
■Engine 2 Cycle 40-46 class engine (sold separately)
■Battery (EP) 14.8V-4,000-5,000mAh Li-Po battery (sold separately)
■Main Wing Area 44dm2
■Wing Loading 55.7-55.9g/dm2
■Airfoil Original semi-symmetrical
■Propeller size D11 x P7-D12 x P8 (sold separately)
■Tire size Nose 60mm / Main 60mm
■Dihedral 2.5°
■Side Thrust 2°
■R/C system (EP) 4ch, 4 servo, 1 ESC (sold separately)
■R/C system (GP) 4ch, 5 servo (sold separately)
■Length 166.5mm
■Width 75.0mm
■Height 44.0mm
■Wheelbase 98.0mm （LL）
■Tread F : 68.5mm R : 65.0mm
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow+1.5mm(for RWD)
■Rear Wheel Offset Wide +1.0mm(for RWD)
■R/C System Syncro KT-531P
■Length 181.0mm
■Width 78.0mm
■Height 40.0mm
■Wheelbase 102.0mm （3L）
■Tread F : 68.5mm R : 66.0mm
■Chassis RWD（MR-03）
■Motor Mount LM
■Front Wheel Offset Narrow +2.7mm
■Front Wheel Offset Wide +0.8mm
■R/C System Syncro KT-531P
